乳房三维形貌非接触性测量系统的研制

南方医科大学学报 ›› 2005, Vol. 25 ›› Issue (03): 262-266.

乳房三维形貌非接触性测量系统的研制

查选平¹, 杜芳², 高建华¹, 李世恒², 姜平¹, 刘四方², 连云峰²

1. 南方医科大学南方医院整形外科, 广东, 广州510515;
2. 军械工程学院机械制造教研室, 河北, 石家庄, 050003

出版日期:2005-03-20 发布日期:2005-03-20
基金资助:
收稿日期:2004-10-21。
基金项目:国家自然科学基金(30471797);广东省自然科学基金(32850);广州市科技攻关计划项目(2004Z3-E0231)
作者简介:查选平(1972- ),男,南方医科大学在读博士研究生,电话:020-61641861,E-mail:zxpingdoctor@sohu.com.
通讯作者:高建华,电话:020-85141861

Three-dimensional breast non-contact measurement

ZHA Xuan-ping¹, DU Fang², GAO Jian-hua¹, LI Shi-heng², JIANG Ping¹, LIU Si-fang², LIAN Yun-feng²

1. 南方医科大学南方医院整形外科, 广东, 广州510515;
2. 军械工程学院机械制造教研室, 河北, 石家庄, 050003

Online:2005-03-20 Published:2005-03-20

摘要/Abstract

摘要： 目的应用计算机辅助光学投射条纹测试技术(computer-aided projection fringe measurement,CAPFM)研制乳房三维形貌非接触性测量系统。方法基于CAPFM和软件编程技术研制乳房三维形貌非接触性测量仪,论述其基本结构和原理,并采用该系统测量塑料人体模特乳房三维形貌以检验其性能。结果采用该系统测量乳房具有以下优点:(1) 非接触性三维测量过程;(2) 测量速度快,采集数据仅需0.5s,测量总耗时大约2~3min;(3) 自动化程度高,测量过程基本由计算机软件控制;(4) 线性项目测量灵敏度达0.6mm,体积达1ml,完全满足临床需要;(5) 测量结果可以数值、二维图形和三维数字图像形式存储和显示,生动形象并便于后续研究。结论基于CAPFM原理研制的乳房三维形貌非接触性测量系统是先进的和值得推广的。

Abstract: Objective To develop a system for three-dimensional (3D) non-contact measurement of breast using computer-aided projection fringe measurement (CAPFM).Methods A system of 3D non-contact breast measurement was developed based on CAPFM and used for measurement of a plastic model mimicking human breast.Results The CAPFM system was capable of non-contact 3D measurement with rapid data collection (within 0.5 s) and measurement (no longer than -3 min). This system was highly automatic, and with software-controlled measurement, the sensitivity was as high as 0.6mm (for linear measurement) and 1ml (for volume measurement), to well meet the clinical requirements. The measurement results could be stored and expressed in numerical values or represented in vivid 2D figures and 3D images, which facilitated subsequent studies.Conclusion The 3D non-contact breast measurement system on the basis of CAPFM can be helpful for medical assessment of the breast.

中图分类号:

R826.8

查选平¹, 杜芳², 高建华¹, 李世恒², 姜平¹, 刘四方², 连云峰². 乳房三维形貌非接触性测量系统的研制[J]. 南方医科大学学报, 2005, 25(03): 262-266.

ZHA Xuan-ping¹, DU Fang², GAO Jian-hua¹, LI Shi-heng², JIANG Ping¹, LIU Si-fang², LIAN Yun-feng². Three-dimensional breast non-contact measurement[J]. Journal of Southern Medical University, 2005, 25(03): 262-266.

参考文献

[1] Galdino GM,Nahabedian M,Chiaramonte M,et al. Clinical applications of three-dimensional photography in breast surgery[J]. Plast Reconstr Surg,2002,110(1):58-70.
[2] Tebbetts JB. A system for breast implant selection based on patient tissue characteristics and implant-soft tissue dynamics [J]. Plast Reconstr Surg,2002,109(4):1396-409.
[3] Loughry CW,Sheffer DB,Price TE,et al. Breast volume measurement of 248 women using biostereometric analysis [J]. Plast Reconstr Surg,1987,80(4):553-8.
[4] 金观昌,陈炜,鲍乃铿.计算机辅助投射条纹系统在三维形状测量中的应用[J].清华大学学报(自然科学版),2001,41(1):72-6.
[5] Halioua M,Liu HC.Opticalthree-dimensional sensing by phase measuring profilometry[J].Opt Lasers Eng,1989,11(3):185-205.
[6] 高振艳,钟约先,曹起骧,等.投影栅相位法三维曲面的光学检测技术[J].光学学报,1995,15(11):1576-80.
[7] 高振艳,钟约先,由志福.投影栅相位检测法中的多幅图像拼接处理技术[J].清华大学学报,1998,38(1):33-6.
[8] Qiao Q,Zhou G,Ling Y. Breast volume measurement in young Chinese women and clinical applications [J]. Aesthetic Plast Surg,1997,21(5):362-8.
[9] Fowler PA,Casey CE,Cameron GC,et al. Cyclic changes in composition and volume of the breast during the menstrual cycle measured by magnetic resonance imaging [J]. Br J Obstet Gynaecol,1990,97(6):595-602.
[10] Foster MA,Knight CH. Nuclear magnetic resonance (NMR) imaging:a non-invasive technique for measuring mammary gland development[J]. Proc Physiol Soc,1983,341(2):82-3.
[11] 单磊.乳房体积生物立体测量系统的研制[C].第一军医大学硕士学位论文,2002.8-38.
[12] 胡华新,刘学军,孙广慈,等.应用计算机辅助测量乳房体积及其临床应用[J].中华医学美学美容杂志,2002,8(2):62-5.