南方医科大学学报 ›› 2004, Vol. 24 ›› Issue (03): 352-354.

• • 上一篇    下一篇

聚乳酸载药纳米球的制备工艺及性能研究

李良1, 李国明2, 黄伟华1   

  1. 1. 南昌市卫生防疫站, 江西, 南昌, 330006;
    2. 华南师范大学化学系, 广东, 广州, 510631
  • 出版日期:2004-03-20 发布日期:2004-03-20
  • 基金资助:
    收稿日期:2003-7-23。
    作者简介:李良(1975- ),男,硕士,技师,研究方向:生物医学高分子药物缓释材料,E-mail:liangli113@sina.com

Preparation of drug-loaded polylactic acid nanospheres and drug-releasing performance evaluation

LI Liang1, LI Guo-ming2, HUANG Wei-hua1   

  1. 1. 南昌市卫生防疫站, 江西, 南昌, 330006;
    2. 华南师范大学化学系, 广东, 广州, 510631
  • Online:2004-03-20 Published:2004-03-20

摘要: 运用均匀设计实验,以灰黄霉素为囊心物质用油包水溶剂挥发法制备灰黄霉素/聚乳酸纳米球,并且分析比较了载药微米球和纳米球的释药性能。结果表明所获得的纳米球球形较好且较为分散,粒径分布较为均一,粒径在114 nm左右。经线性回归和三次重复试验得出综合评分S为95.59,误差为3.66%,载药量为13.55%。载药微米球的释药速率较慢,而纳米球在性能上有一个“突跃”,能起到“增溶”药物的作用。

Abstract: The polylactic acid (PLA) nanospheres containing griseofulvin were prepared by a water-in-oil solvent evaporation method adopting an uniformly designed experiment, and the drug-releasing rates were compared between the microsphere and nanosphere. The results showed that the nanospheres was good in spherical shape with narrow distribution of the particle sizes. The particle diameter was about 114 nm, and the comprehensive score of the nanosphere was 95.59, with the error of 3.66% and the drug content of 13.55% by the linearity regression averaged from the results of the three repeat experiments. The drug-releasing rate of the microsphere was relatively slow, while that of the nanosphere can have an abrupt increase, indicating its function of solubilizing the drug.

中图分类号: